[TOP 10] Best Mlok Bipod [2022]

Best Mlok Bipod
Disclaimer: As An Amazon Associate I Earn From Qualifying Purchases.
NoProductScoreAction
1Magpul Rifle Bipod Gun Rest for Hunting and Shooting9.8Check Price On Amazon
2UTG Recon Flex M-LOK Bipod9.8Check Price On Amazon
3XAegis 5.7" to 8" Rifle Bipod Adjustable Compatible with Mlok Hand-Guard9.6Check Price On Amazon
4Feyachi B13 Mlok Bipod 6-9 Inch Lightweight Rilfe Bipod Directly Attach to Mlok System for Hunting and Shooting9.6Check Price On Amazon
5TufForce M-Lok Bipod Mount Adapter/Swivel Stud on M-LOC System9.4Check Price On Amazon
6UTG Recon Flex M-LOK(R) Bipod9Check Price On Amazon
7CVLIFE Bipod Adapter Bipod Mount for M-Rail 4 T-Nuts 4 Screws and 1 Wrench8.8Check Price On Amazon
8Magpul M-LOK Bipod Mount8.4Check Price On Amazon
9CVLIFE Rifle Bipod, 7.5-9 Inch Bipod for Rifle with Two Point Rifle Sling Adjustable Foldable Attach Directly Bipod8.2Check Price On Amazon
10XAegis MLOK Bipod Adapter Mount Fits on Mlok System - Mlok Sling Stud - Includes 4 T-Nuts & 4 Screws and 1 Wrench (Mlok bipod Adapter)8.2Check Price On Amazon

1. Magpul Rifle Bipod Gun Rest for Hunting and Shooting

  • Made of lightweight Mil-Spec hard anodized 6061 T-6 aluminum and Injection-molded polymer; Aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps.
  • Optimized for rapid one-handed adjustments; quickly and quietly transitions between countless user configurations.
  • Easily loaded with stabilizing forward tension without fear of failure or warping; At just over 11 ounces, the Magpul bipod is lighter than many pricier bipods currently on the market.
  • Spring-tension legs stow neatly forward and snap down and lock into place with one hand; Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents.
  • An industry-exclusive 50 degrees of total tilt and 40 degrees of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots.

2. UTG Recon Flex M-LOK Bipod

  • Directly attaches to m-lok handguards at the 3 and 9 o’clock positions
  • Ergonomic spring loaded slide locking ring for quick and effortless bipod deployment
  • Lightweight aircraft aluminum construction with a matte black finish

3. XAegis 5.7″ to 8″ Rifle Bipod Adjustable Compatible with Mlok Hand-Guard

  • XAegis Tactical Bipods are precision machined from aircraft grade aluminum for lasting durability
  • Each leg mounts directly to an Mlock handguards at the 3 and 9 o’clock positions requiring only two slots.
  • The versatile bi-directional bipod can be be locked in any of five positions allowing for forward or backward stowing and different lengths to accomodate your firearm and your surroundings.
  • Center Height Adjustable From 5.7″ to 8.0″
  • These Adjustable Bipods are ideal for both bench shooting and prone shooting in the field

4. Feyachi B13 Mlok Bipod 6-9 Inch Lightweight Rilfe Bipod Directly Attach to Mlok System for Hunting and Shooting

  • Feyachi B13 Mlok Bipod Designed compatible with Mlok System, Directly Attach to the Rail.
  • Easy to Install, No Adapter Needed, Which Reduces the Weight from 11 oz to 8.7 oz.
  • Lightweight Aircraft Aluminum and Sturdy Hardened Steel Construction with Matte Black Finish.
  • Foldable and Adjustable, 6″-9″ Bipod Has 5 Settings for Different Height Adjustments, It’s Ready to Meet All Situations.
  • Low Profile B13 Bipod Securely Fit Your Rifle on Mlok Handguard and Create the Ideal Shooting Experience.

5. TufForce M-Lok Bipod Mount Adapter/Swivel Stud on M-LOC System

  • Tufforce swivel stud fit on M-Lock System for sling or bipod connecting…….
  • 1 Steel stud and 1 special steel M-Lock nut and 1 lock wash in package, Steel, Black oxide finished;
  • nut’s thickness Designed to leave a margin to file down for fitting all hand guard’s thickness in installation.
  • Or add a small washer out hand guard, in which it should be tighten up.
  • Black, This is Free shipping via. USPS First Glass only.

6. UTG Recon Flex M-LOK(R) Bipod

  • Directly attaches to m-lok handguards at the 3 and 9 o’clock positions
  • Ergonomic spring loaded slide locking ring for quick and effortless bipod deployment
  • Lightweight aircraft grade aluminum construction finished in a matte black anodize
  • Included components: Bipod

7. CVLIFE Bipod Adapter Bipod Mount for M-Rail 4 T-Nuts 4 Screws and 1 Wrench

  • Made of high quality aluminum construction with black anodized finish.
  • Fits on rails and works with the most common bipods in the market,can also be used as a sling stud when bipod is removed.
  • Upgraded T-nuts design increases width to provide a sturdy support for bipod.
  • Comes with extra set of the screws and T-nuts for further using.
  • Enhanced sling stud won’t strip off.

8. Magpul M-LOK Bipod Mount

  • Allows for the attachment of most Harris-style stud mounted bipods to M-LOK compatible mounting locations.
  • Low-profile, robust, and elegant mounting solution for the most common bipods on the market
  • Utilizes the direct-connect properties of the M-LOK System; Bipod sits closer to the mounting surface than other adapters while providing superior support to the bipod for strength and stability.
  • Also compatible with other accessories that attach to traditional sling studs
  • Machined from milspec-anodized aluminum; Features beveled ends and corners to reduce snagging and sharp edges; All mounting hardware included.

9. CVLIFE Rifle Bipod

  • We have a product patent (NUMBER D879,903).
  • These Bipods are made of harden steel and aluminum, withstanding a heavy recoil.
  • Comprised of two separate legs, these bipod can attach onto handguard at the 3 and 9 O’clock positions and provides a clear lower rail.
  • The rifle sling is made of high-density nylon material, strong and non-slip.
  • Upgraded hook of sling is larger to lock into the swivel easily and securely.

10. XAegis MLOK Bipod Adapter Mount Fits on Mlok System – Mlok Sling Stud – Includes 4 T-Nuts & 4 Screws and 1 Wrench (Mlok bipod Adapter)

  • This bipod adapter is specific for the M-Lok hand-guard and made to work with Harris type bipods and the most common bipods on the market, it is also compatible with other accessories that attach to traditional sling studs.
  • This bipod adapter is specific for the M-Lok hand-guard and made to work with Harris type bipods and the most common bipods on the market, it is also compatible with other accessories that attach to traditional sling studs.
  • Upgraded low profile design, raised edges is to create a very snug fit that ensures the bipod to rest on the M-lok system more securely without wiggling.
  • Comes with one more set of the screws and T-nuts in case they’re missing or damaged
  • We guarantee you 100% refund if you are not satisfied with our products

Add a Comment

Your email address will not be published. Required fields are marked *